MS300 Advanced Users Guide
3/3/2005
Page 42 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
McIntosh IR Key Codes
The MS300 Remote Control uses the Philips RC6 Mode 6A IR protocol. The following
table lists the RC6 Mode 6A key codes used by the MS300 that can be used in the
ProntoEdit PC application to generate the IR codes for the Philips Pronto remote products
and can also be used to generate the CCF files that can be imported into other 3rd party
applications and control systems.
Note: There are also discrete IR codes listed in the table that are not available on the IR
remote but can be used by control systems for functions such as discrete Power On and
Off.
McIntosh Company Code: 32790
MS1: Address = 1
MS2: Address = 2
MS3: Address = 3
MS4: Address = 4
IR Remote RC6 Mode 6A Key Codes:
Remote Key Label Key Type RC6 Key Code
TV Mode -----
VCR Mode
CABLE Mode -----
AUX Mode -----
AMP Mode -----
TNR Mode -----
CD Mode -----
SAT Mode -----
POWER Primary 0Fh
1 (./?’) Primary 01h
2 (ABC) Primary 02h
3 (DEF) Primary 03h
4 (GHI) Primary 04h
5 (JKL) Primary 05h
6 (MNO) Primary 06h
7 (PQRS) Primary 07h
8 (TUV) Primary 08h
9 (WXYZ) Primary 09h
0 (@-*#) Primary 00h
MUTE Primary 0Ch
ENTER Primary 10h
+ (VOLUME) Primary 0Ah
- (VOLUME) Primary 0Bh
MODE (LAST) Primary 11h
SETUP (SLEEP) Primary 12h
OPTION (INPUT) Primary 13h
+ (CH/PAGE) Primary 0Dh
To Next Page
Loading...
