MS300 Advanced Users Guide
3/3/2005
Page 5 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
Additional Connection and Hookup
Information
Digital Audio Inputs
The MS300 defaults to the TosLink inputs for changer audio. If you are using the coax
inputs it is necessary to manually change the digital inputs from TosLink to Coax using
the Setup / Audio / Digital Input Preferences screen.
Audio Outputs
The TosLink, Coax, and analog audio outputs are active when playing media from the
internal hard drive or Internet Radio.
Both digital and analog connections must be made from the changer to the MS300 for the
MS300 to output both digital and analog outputs.
This table shows which audio outputs are active for each type of audio source.
Analog Out Digital TosLink Out Digital Coax
Out
Hard Drive Audio YES YES YES
Changer Analog YES
Changer TosLink YES YES
Changer Coax YES YES
Audio Source
Internet Radio YES YES YES
For example, connecting only the analog audio outputs of the changer to the MS300 will
not provide digital audio on the digital outputs of the MS300.
To Next Page
Loading...
