McIntosh MS300 - Page 60

MS300 Advanced Users Guide
3/3/2005
Page 60 of 65
2 Chambers Street • Binghamton, NY 13903-269 Phone: 607-723-3512 / 800-538-6576 • Fax: 607-724-0549
Technical Support 866-458-6910 9:00AM to 6:00PM EST, M-F www.mcintoshlabs.com
70 ESCX7003
70 04 Set Music Play Mode
70 ESCX70040010002xx
xx = music play mode, where
01 = normal
02 = repeat track
03 = repeat title
04 = repeat group
05 = random title
06 = random group
70 05 Change guide view
70 ESCX70050010002xx
xx = guide view, where
01 = Artist View (music) or Title View (movies)
02 = Title View (music only)
03 = Song View (music only)
04 = Cover View (music and movies)
70 06
Lock this control interface (enter password protected
mode)
70 ESCX7006
70 07 Unlock this control interface (leave password protected
mode)
70 ESCX7007001aaaabbbb
aaaa = length of security password
bbbb = security password
Note that when the host is in power standby mode, any command will cause the unit to
enter the power on mode before executing the command. There are two exceptions to
this: a client may register and unregister for unsolicited events without turning the host
on, and the Status Command “Get Power State” (ESCX5001) will return the current state
of the unit without turning it on.