McIntosh MSA5500 - External Control Setup Menu


MSA5500
External Control Setup Menu
RS232 Baud Rate







perform the following steps:
 
Control Setup Menu.
2. 

Ext Ctrl: < RS232 >
< 115200 Baud




Settings Options
 Enabled
 
 Normal, Alternate
IR Codes


The Second Set of Control Codes the MSA5500

Codes. The Alternate Codes are used when the
MSA5500 is used in the same location as another


the operation of both units at the same time. To

perform the following steps:
 
Control Setup Menu.
2. 

Ext Ctrl: < IR Codes
< Normal

Codes.
Ext Ctrl: < IR Codes
Alternate >




5. 

Front IR
The MSA5500 Front Panel Sensor, which receives




steps:
 
Control Setup Menu.
2. 

Ext Ctrl: Front IR >
< Enabled


Ext Ctrl: Front IR >
Disabled >

