6.2.4 Switching Mode
There are several ways to switch the mode for the Chiller. Please take note that some mode cannot be set
due to current Chiller model settings.
i) [Summary Pages]
Cooling - Press and hold COOL button.
Heating - Press and hold HEAT button (if it allows to set).
Boiling - Press and hold HEAT button again (if it allows to set).
ii) [Operation Menu]
In [Operation Menu], select “Mode” and press
ENTER to start setting or ESC to exit to [Main Menu]
Toggle ON/OFF via UP or DOWN button, and then
press ENTER to confirm the change or ESC to
cancel.
24
<ENTER> <ENTER>
Summary Pages Main Menu Operation Menu
<ESC> <ESC>
Mode
Chiller Model
Cooling Heating Boiling
Chiller √ x x
Heat Pump √
√ x
Chiller / Boiler √
x √
Heat Pump / Boiler √
√ √
Chiller + Boiler √
x Auto
Heat Pump + Boiler √
√ Auto
√ - Allow to set
x - Not Allow to set
Auto - Turn ON automatically
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
To Next Page
Loading...
Need help?
General
