6.2.5 Changing Mode Set Temperature
There are 2 ways to change the mode set temperature for the Chiller.
i) [Operation Menu]
25
<ENTER> <ENTER>
Summary Pages Main Menu Operation Menu
<ESC> <ESC>
In [Operation Menu], select “Cool Temp” / “Heat
Temp”and press ENTER start setting or ESC to exit
to [Main Menu].
Change value via UP or DOWN button, and then press
ENTER to confirm the change or ESC to cancel.
In [Set Parameter], select “Regulator” and press
ENTER. Press ESC to exit to [Main Menu].
Select “R3”/ “R5” and press ENTER to start setting
or ESC to exit to [Set Parameter] menu.
Change value via UP or DOWN button. The
boarderline is limited by R5&R6 (cool), R7&R8(heat).
Press ENTER to confirm or ESC to cancel.
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temperature : 12.0° C
Heat Temperature : 40.0° C
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temperature : 12.0° C
Heat Temperature : 40.0° C
1. General
2. Regulator
3. Compressor
4. Defrost
5. Antifreeze
6. Inverter
7. Alarm and Contact
R1 Cool SP : 12.0°C
R2 Cool Diff : 3.0°C
R3 Heat SP : 40.0°C
R4 Heat Diff : 3.0°C
R5 Min Cool SP : -20°C
R6 Max Cool SP : 40°C
R7 Min Heat SP : -20°C
R1 Cool SP : 12.0°C
R2 Cool Diff : 3.0°C
R3 Heat SP : 40.0°C
R4 Heat Diff : 3.0°C
R5 Min Cool SP : -20°C
R6 Max Cool SP : 40°C
R7 Min Heat SP : -20°C
To Next Page
Loading...
Need help?
General
