6.2.6 Manual Defrost
User can choose which compressor will go into manual defrost cycle by using the Chiller Panel, as long
as the condition is fulfilled with defrost condition. This can be done in [Operation Menu].
Please take note that “Manual Defrost” option will only available in HEATING mode. It will disappear in
COOLING/ BOILING mode.
“Manual Defrost” disappear when Chiller not in HEATING mode
In [Operation Menu], select [Manual Defrost], press
ENTER to go into it, or ESC to exit to [Main Menu].
Select which compressor to go into defrost cycle via
UP or DOWN button. Press ENTER to confirm or ESC
to exit to [Operation Menu].
26
De fr ost Compressor
Comp 1
<ENTER> <ENTER>
Summary Pages Main Menu Operation Menu
<ESC> <ESC>
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
OPERATION MENU
Status : ON
Mode : Heating
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
OPERATION MENU
Status : ON
Mode : Heating
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
Manual Defrost
To Next Page
Loading...
Need help?
General
