MDC FORBES 12+ - Service Schedule

www.marketdirect.com.au
I
Ph: 1300 494 494
I
©Copyright
I Page | 89
Service Schedule
500KM FIRST SERVICE
CHECKED
Hitch
• Check hitch bolts to 90Nm.
• Lubricate with high temp bearing grease
Handbrake
• Inspect and adjust handbrake
Brakes &
Bearings
• Inspect and adjust brakes. Check bearings are well greased and crown
nut is correctly tightened.
Wheel nuts
• Inspect condition and torque to 125Nm (12mm studs)
(140Nm 14mm studs alloy rims) (200Nm 14mm studs steel rims)
Tyres
• Inspect for abnormal wear, damage, and pressure
General fixings
• Ensure no loose fittings
Seals & Latches
• Check all seals on doors and hatches compress 30-50%. All seals in
serviceable condition and free of damage.
Suspension
• Grease bushes and check for play.
• Check torque on suspension hanger bolts (190nm)
• Check retaining chain shackles tight.
Service Centre:
Notes:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________