21
Installing the SunFinder:
The SunFinder is a pointing device that will allow you to easily locate the Sun.
Follow the below instructions to install and use the SunFinder.
STEP 1: Remove the two viewfinder mounting thumb screws from the optical
tube.
STEP 2: Place the SunFinder mounting bracket onto the threaded screws,
with the SunFinder pin hole pointed forward towards the front of the telescope.
STEP 3: Use the two mounting thumb screws to secure the SunFinder
bracket onto the optical tube. Tighten to a firm feel.
Step 1.
Step 3.
20
To Next Page
Loading...
