27
Solar Filter Maintenance:
The solar filter can be cleaned by using a soft micro-fiber cloth, soft brush, or soft blower. First, gently blow
off any dust that may accumulate on the filter from outside use. If the filter is still dirty than you may use a
soft brush or micro-fiber cloth to remove the debris by gently wiping away the dust or debris. Do not clean
with water or other liquids.
Please keep in mind that the solar filter film can be sensitive and the film can be scratched or damaged
easily. The solar filter should be handled with care at all times to ensure safety when in use. This will also
minimize accidental damage.
When the filter is not in use, store in a cool dry place.
Solar Filter Safety Compliance:
The EclipseView solar filter meets the following safety and compliance standards:
- Meets the requirements for ISO 12312-2:2015
- “CE” certified to the transmission requirements of scale 12-16 of EN 169/1992
- Meets the 2012 Transmission Requirements of EN 1836:2005 & AS/NZS 1338.1:1992 for Eclipse filters
26
To Next Page
Loading...
