Mebay DC30D - Display and Customization Settings; LCD Settings

DC30D GENSET CONTROLLER USER MANUAL
24
7.External instant warning input.
8.External instant alarm input.
9.High Temperature cooling and Stop Input : When
the signal is valid and the generator is in normal
operation, if there is a high temperature alarm, the
controller will stop the generator after high-speed heat
dissipation delay; when the signal is invalid, if there is
a high temperature alarm, the controller will stop
directly.
10.Reserve for switching input
11.Fuel level sensor SGH
12.Fuel level sensor SGD
13.Fuel level sensor MEBAY 150
14.Fuel level sensor VDO ohm range10-180
15.Fuel level sensor VDO TUBE TYPE 90-0
16.Fuel level sensor US ohm range 240-33
17.Fuel level sensor GM ohm range0-90
18.Fuel level sensor GM ohm range0-30
19.Fuel level sensor Ford(73-10)
20.Fuel level sensor ZP61-10
21.Self-define fuel level sensor
6
Programmabl
e input 3
（Functional
of PIN 8）
0-23(11. Oil
pressure sensor
VDO 0-10Bar)
0.Disable.
1.Remote start (on load).
2.Low oil pressure alarm switch input.
3.High temperature alarm switch input.
4.Low water level alarm switch input.
5.Low fuel level warning switch input.
6.Low fuel level alarm switch input.
7.External instant warning input.
8.External instant alarm input.
9.High Temperature cooling and Stop Input : When
the signal is valid and the generator is in normal
operation, if there is a high temperature alarm, the
controller will stop the generator after high-speed heat
dissipation delay; when the signal is invalid, if there is
a high temperature alarm, the controller will stop
directly.
10.Reserve for switching input
11.Oil pressure sensor VDO 0-10Bar
12.Oil pressure sensor MEBAY-003B
13.Oil pressure sensor SGH
14.Oil pressure sensor SGD
15.Oil pressure sensor SGX
16.Oil pressure sensor CURTIS
17.Oil pressure sensor DATCON 10Bar
18.Oil pressure sensor VOLVO-EC