Page 16 92555
June 1, 2012 Crossover Series
Crossover Series Operating Instructions & Function Tests
Operate from Platform
• Enter the platform through the personnel entry gate. Close and secure the
entry.
• Turn the platform selector switch to the ON position.
• Press the Horn Button (if equipped) to verify proper operation.
Tilt Indicator Light
Light ON and alarm sounding indicates an unsafe condition.
• STOP. The machine is not level. Carefully lower the platform. Move the
machine to a firm, level surface, or if equipped with outriggers, level the
machine.
ART_3826
ART_3824
ART_3825
To Next Page
Loading...
Need help?
General
