92555 Page 29
Crossover Series June 1, 2012
Crossover Series Maintenance
Lubrication
Operator may perform routine maintenance only. Lubrication listed as Scheduled Maintenance must be performed by a qualified
service technician.
Lubrication
No. ITEM SPECIFICATION FREQUENCY
1Hydraulic
Reservoir
Mobile Fluid DTE 10, DTE 13 M, or AW32 Routine Maintenance
Check sight gauge level daily
Scheduled Maintenance
Change yearly or every 600 hours, whichever
occurs first
Do not substitute other fluids as pump damage may
result.
Fill to the middle of the sight gauge with platform in the
stowed position and stabilizers retracted.
2 Hydraulic Filter Filter Element
(located inside Hydraulic Reservoir)
Scheduled Maintenance
Normal Conditions
Change every six months or 300 hours, whichever
occurs first
Severe Conditions--very dusty, exceptionally hot
or exceptionally cold conditions
Change every three months or 150 hours,
whichever occurs first
ART_3816
Sight
Gauge
Filter
Housing
Controls Module
components removed
for clarity
Hydraulic
Reservoir
To Next Page
Loading...
Need help?
General
