EasyManuals Logo

Mec Crossover Series User Manual

Mec Crossover Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Page 6 92555
June 1, 2012 Crossover Series
Crossover Series Safety
Fall Hazards
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing on the
platform floor at all times.
DO NOT exit the platform when elevated
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the platform entry is properly closed and secured before operating the machine.
Operators must comply with employer and job site rules and governmental regulations
regarding the use of personal protective equipment.
Collision Hazards
Check path before moving for equipment, materials or other obstructions.
Check path before moving for overhead obstructions.
Check path before moving for crushing hazards when holding the platform rail.
Reduce travel speed when moving the machine on slopes, when near personnel and obstacles,
or when surface conditions are wet, slippery or otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have been locked out
and/or precautions have been taken to prevent any possible collision.
Stunt driving and horseplay are PROHIBITED.
Watch for personnel and obstructions below the platform when lowering the platform.
DO NOT EXIT PLATFORM WHEN
ELEVATED
DO NOT CLIMB ON RAILS
Art_2826
Art_2825
Art_2835
Art_2829
Art_2827

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mec Crossover Series and is the answer not in the manual?

Mec Crossover Series Specifications

General IconGeneral
BrandMec
ModelCrossover Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals