Page 22 Micro 26 - Service & Parts Manual
April 2019Section 11 - Maintenance
Steering Yokes
Regular application of lubrication to the steer yokes is essential to good machine performance and
service life. Continued use of an insufficiently greased steer yoke will result in component damage.
Open the steer yoke cover.
No zerk fittings.
Pack multipurpose grease into the steer yoke until the steer yoke is almost full.
Install the cover.
Repeat this step for the other steer yoke.
Grease Specification
Chevron Ultra-duty grease, EP NLGI 1 (lithium based) or equivalent.
Hydraulic Fluid
Inspect the condition of hydraulic fluid in the reservoir.
Oil should be a clear and amber in color.
Batteries
Proper battery condition is essential to good machine performance and operational safety. Improper
or damaged cables and connections can result in component damage and hazardous conditions.
ELECTROCUTION / BURN HAZARD. CONTACT WITH ELECTRICALLY
CHARGED CIRCUITS COULD RESULT IN DEATH OR SERIOUS INJURY.
REMOVE ALL RINGS, WATCHES, AND OTHER JEWELRY.
WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT (PPE) - FACE
SHIELD & GLOVES BEFORE SERVICING THE BATTERIES.
BODILY INJURY HAZARD. BATTERIES CONTAIN ACID. AVOID SPILLING
OR CONTACTING BATTERY ACID. NEUTRALIZE BATTERY ACID SPILLS
WITH BAKING SODA AND WATER.
1.
2.
3.
4.
5.
To Next Page
Loading...
