Page 33 Micro 26 - Operator’s Manual
March 2019Section 9 - Decals
Item Part Number Description Qty.
1 42542 Decal, Micro 26 2
2 94114 Decal, MEC Square 2
3 41646 Decal Danger - Crushing Hazard 3
4 41748 Decal, Engage Safety Arm 3
5 94949 Serial Plate, New ANSI Standard, Slab Scissors 1
6 41641 Decal Danger - Explosion / Burn Hazard 1
7 41666 Decal Notice - Main Power Switch Operation 1
8 41642 Decal, Tip Over Hazard 1
9 94659 Decal, Battery Charger & Power To Platform 1
10 94115 Decal, MEC Oval, Small 1
11 42541 Platform Decal - Micro 26 (Indoor Only Rated) 2
12 41635 Decal Instructions - Tie Down Point 4
13 41634 Decal Instructions - Lift Point 4
14 41631 Decal, Lower Controls 1
15 41639 Decal Instructions - Refer The Operator Manual 2
16 41636 Decal Instructions - Emergency Lower 1
17 41649 Decal, Warning Panel 1
18 90719 Decal, MEC Oval 1
19 94423 Decal, MEC Direct Electric Drive 1
20 41648 Decal - Lanyard Anchorage 4
21 8911 Decal, Manuals Inside Icon 1
22 41749 Decal Danger - Safety Rules 1
23 41647 Decal Danger - Tip-over Hazard 1
24
94120 Decal, Drive/Lift Side for Slabs (Black) 2
94528 Decal, Drive/Lift Side for Slabs (Gray) 2
25 41632 Decal, Platform Controls 1
26 41640 Decal Instructions - Platform Controller Normal Position 1
27 91850 Decal, Caution Triangle Overhead Clearance 2
28 90732 Decal, Warning No Powerwash 1
To Next Page
Loading...
