mecair SR C17 - Using the Remote Control

91
EN
4.8 Using the remote control
The remote control
should be pointed
towards the IR recei-
ver on the control pa-
nel of the air diffuser.
• Press a button
• The command is
sent directly to the
rooftop air conditio-
ner.
• The rooftop air con-
ditioner confirms
that it has received
the data by emitting
a loud beep.
If data transmission fails, aim the remote control at the IR receiver on the
control panel and try again. The data is then sent again to the rooftop air
conditioner. The rooftop air conditioner confirms that it has received the
data by emitting a loud beep.
4 USE