95
5.5 “Ventilation” mode selection
In “Ventilation” mode, the power of the air supply in the passenger com-
partment can be set using the remote control.
Using the FAN button ( ) on the remote control, select the desired ven-
tilation level from the following modes. By repeatedly pressing the ventila-
tion button, the air conditioner switches to the next speed with each touch:
Speed 1 ( )
Speed 2 ( )
Speed 3 ( )
Speed 4 Automatic ( )
The rooftop air conditioner confirms that it has received the data by emit-
ting a loud beep.
The remote control display will show the set fan speed.
5.6 “Heating” mode selection (only on some
models)
Press the MODE ( ) key on the remote control repeatedly until the
Heating symbol ( ) appears on the top of the display. Using the remote
control, you can set a temperature between 16°C and 30°C and the fan
speed by pressing the FAN key ( ).
To select the ventilation speed, press the FAN button on the remote control
( ) consecutively until the desired one is selected from the 4 available.
5 FUNCTIONALITIES
To Next Page
Loading...
