Need help?Do you have a question about the mecalac 14 MBX and is the answer not in the manual?
Details the articulation of the rear axle for ground contact.
Explains the function of standard/telescopic stabilizers for stability.
Describes the rear chassis, engine, and pump systems.
Outlines the 4x4 permanent transmission with limited-slip differential.
Explains the turntable connection and slewing drive mechanism.
Details the cab's construction, approval standards, and control panel.
Describes the grouping of controls on the instrument panel and consoles.
Explains the seat's adjustability features for operator comfort.
Covers the control of equipment via manipulators and its components.
Details the tool-holder for quick bucket or tool changes.
Lists engine type, power, torque, capacity, and dimensions.
Details axle types, gear ratios, and differential specifications.
Lists various fluid capacities for the machine's systems.
Describes batteries, starter, alternator, and wiring connections.
Outlines the three independent hydraulic circuits and their functions.
Presents the working range diagram for the back-hoe position.
Shows the working range diagram for the loading bucket position.
Stability loads for longitudinal lifting with stabilizers deployed.
Stability loads for longitudinal lifting without stabilizers.
Stability loads for transverse lifting with standard stabilizers.
Stability loads for transverse lifting without stabilizers.
Stability loads for transverse lifting with telescopic stabilizers.
Procedure for disconnecting the hydrostatic travel for towing.
Steps to release the slewing motor brake if the turntable is misaligned.
Instructions for loading the machine onto a trailer securely.
Guidance on safely lifting the machine using slings.
Diagram of the hydraulic circuit for machine movement and travel.
Diagrams for accelerator, main, and parking brake hydraulic systems.
Diagrams for steering and slewing hydraulic systems.
Diagram showing the turntable's hydraulic supply and return.
Diagrams for equipment pump, stabilizers, and steering lock (optional).
Diagrams for boom, dipper, offset, and additional functions.
Diagram for the bucket hydraulic circuit.
Diagram illustrating the configuration of the 5-spool valve.
Diagram for optional hammer return hydraulic equipment.
Diagram for the optional tool-holder hydraulic circuit.
Diagram for the optional air conditioning hydraulic circuit.
Diagrams for optional telescopic stabilizers and steering lock.
Diagram for optional 3 safety valves.
Diagram for optional 4 safety valves.
Diagram for the optional VOLVO tool-holder.
Identifies the locations and designations of solenoid-operated valves.
Details the layout and function of fuses and relays in the cab.
Locates the electrical box in the rear chassis and its fuse/relay assignments.
Identifies the location of the optional AC relays box.
Details steps for adjusting engine maximum and minimum regimes.
Procedures for adjusting hydraulic pressures related to gears.
Procedures for adjusting directional controls.
Procedures for adjusting hydraulic system pressures for equipment.
General| Brand | mecalac |
|---|---|
| Model | 14 MBX |
| Category | Excavators |
| Language | English |
To Next Page
