EN
27
05
Û
CLEANING AND STERILIZATION
2
3
4
5
Clean the surfaces of the rod and of the
handpiece holder with a soft cloth with low
fiber-release, dampened with an enzymatic
detergent solution;
Remove the residues of detergent with a
soft cloth with low fiber-release dampened
with distilled water;
Individually seal the rod and the handpiece
support in separate single-use sterilization
packets. Sterilize in steam autoclave;
Once you’ve finished the cleaning
operations, check the supports under an
adequate source of light, paying attention
for dirt residues and, if need be, repeat the
cleaning cycle;
To Next Page
Loading...
