mectron Piezosurgery touch - Page 9

EN
8
Completely open the peristaltic pump and
remove the peristaltic pump tube or the
tube of the bone grafting kit (if present).
Close the pump again;
Disconnect the peristaltic pump tube from
the connector of the handpiece;
5
6
7
8
If the bone grafting kit has been used,
disconnect the tube-to-tube connector from
the peristaltic pump tube and from the tube
of the bone grafting kit;
If present, unscrew the insert from the
handpiece by using the torque wrench;
9
Unscrew the front cone of the handpiece;
NOTE: on the cone with LED light the metal
ring cannot be separated from the cone in
plastic;