16
Selecting a Drum Kit
3. Press [SAVE/ENTER]
The user name will appear.
4. Press [PAGE+]/ [PAGE-] to move the cursor to the character
you want to change, then press [+]/[-] button or use the DIAL
to select the character.
5. Press [SAVE/ENTER] again to finish this setting.
Saving KIT
The digital drum allows modifying and saving preset kits and
user Kits in local or SD Card, it is convenient for you to take
along and use.
Saving Kit to local
Note:
In the inner of the kit menu, press the [SAVE/ENTER] button,
you can also enter saving page to save current kit.
1. Press [KIT], then press [+]/[-] button or use the DIAL to select
an source kit.
2. Press [SAVE/ENTER], then press [+]/[-] button or use the
DIAL to select the destination kit
3. Press [SAVE/ENTER]. The rename page will appear.
4. Press [PAGE+]/ [PAGE-] to move the cursor to the character
you want to change, Press [+]/[-] button or use the DIAL to
select the character.
5. Press [SAVE/ENTER] again to finish this setting.
Saving Kit to SD card
1. Make sure you insert a available SD card into the slot.
2. In the kit screen, select a source kit(user kit) which you want
to be saved.
3. Press [SAVE/ENTER], then Press [PAGE+]/ [PAGE-] to
select page “CurKit► Card” or “AllKits► Card”.
4. Press [SAVE/ENTER] to enter rename screen. You can press
[PAGE+]/ [PAGE-] or [+]/[-] button and DIAL to change the
song name.
5. Press [SAVE/ENTER] again to finish this setting.
Note:
If the edited Kit is not saved before selecting another Kit or
turning off digital drum, changes will be lost.
When saving Kits to SD card, the digital drum will automatically
save it (them) on local at the same time, when SD Card is failed
to save(for example,it display "No Card" or "Card error!" and
etc), the digital drum will also save kit(s) on local.
Sv Mykit001
CurKit Card
Allkits Card
To Next Page
Loading...
Need help?
General
