25
Record(RECORD)
100 user songs can be recorded, each song has 7 record tracks (Drum + Percussion + Part1~Part5), in which
Part1~Part 5 can only be recorded by MIDI IN.
Record a New Song
1. Select a new song (behind of the song’s name, there is a “*”
icon), then press the [REC] button to enter record menu.
The click would be started automatically.
The [REC] button is lightened. At this time, if SYNC start is
ON, [PLAY/STOP] button would spark; if not, [PLAY/STOP]
button would be darken.
2. Choose “QUICK RECORD” (without any setting step, you
can immediately start recording) or common “RECORD”.
Quick Record
Without any setting step, you can immediately start recording
drum. In Quick Record, what you record is what you hear
(without click sound), it can’t be quantized or make other record
setting.
1. Press [REC] button and [PART MUTE] button simultaneously
to enter recording statement.
a) If current song is a NEW song, start to record its drum part;
b) If current mode is not the song mode (for example KIT mode
or UTILITY menu etc), assign a NEW song automatically to
start drum part recording;
c) If the drum part of the current user song already have data,
then delete original drum part and record new.
2. In Quick Record, SYNC start is always ON, trigger the pads
to start recording; or you can press [PLAY/STOP] button to
start too.
In recording statement, both the [REC] button and
[PLAY/STOP] button are lightened; LCD displays
“Recording…”
3. In recording statement, press [REC] button to enter
rehearsing statement, in which nothing can be recorded but
time is passing. At this time, the [REC] button is sparking,
[PLAY/STOP] button is lightened; LCD displays“-Rehearsal-”.
Press [REC] button again to go on recording, back to
recording statement.
4. Press [PLAY /STOP] button again to stop recording.
Record
1. Start Recording
Recording Drum/Percussion Parts
In record waiting statement, press [PLAY/STOP] button or
trigger the pads (when SYNC Start is ON) to start recording.
LCD displays “Recording…”, the measure and beat icons
would refresh. At this time, Both [REC] button and
[PLAY/STOP] button would be lightened.
Note:
CLICK sounds could not be recorded.
In recording statement, you could not adjust the tempo value,
and tempo changes can not be recorded too.
To Next Page
Loading...
Need help?
General
