1� Be careful not to damage the camera or subject it to
strong impacts or shocks�
2� Do not touch the optical components for the image sen-
sor, such as the lens, if necessary, please place a clean
and moistened cloth with alcohol and wipe the dirt gen-
tly; When not in use, please place the dust cover on to
the item to protect the image sensor�
Notice
Keep away from the places for high-temperature, heat
source and direct sunlight;
Keep away from water and when get wet, cut o the
power immediately�
Avoid using at damp environment; the reference range
for operation humidity is below 85%RH�
Operation temperature is -10° ~ +50°
Please install it horizontally or wall mount, avoid strenu-
ous vibration and do not place other items on top of the
unit�
Transport and Handling
Please handle the item with care�
Do not use in areas around condensation�
Please disconnect the item from the mains before mov-
ing�
3� Do not aim the camera directly into the sun or at other
intense light sources that could aect the image quality,
this will also shorten the service life for the image sen-
sor�
4� Keep away from laser when it is working, otherwise the
image sensor can be damaged�
5� If the equipment is not working properly, please contact
the store or the service centre, do not disassemble or
modify the equipment in any way�
To Next Page
Loading...