Genio 350 EVK
Genio 350 Evaluation Kit Hardware User Guide
Unclassified
MediaTek Proprietary and
Confidential
© 2022 MediaTek Inc. All rights reserved.
Unauthorized reproduction or disclosure of this document, in whole or in
part, is strictly prohibited.
Page 8 of
2.1 CPU (MT8365)
MediaTek Genio 350 processor integrates multi-core ARM® Cortex-A53 MPCore equipped with the NEON engine
offers processing power necessary to support the latest OpenOs along with its demanding applications such as
web browsing, email, GPS navigation, and games.
The features of the Genio 350 processor (MT8365) include the following:
• Quad-Core ARM Cortex-A53 MPCore Operating at 2.0GHz
• 32KB L1 I-Cache and 32KB L1 D-Cache
• 512KB L2 Cache
• NEON Multimedia Processing Engine
• ARM TrustZone Security
• DVFS Technology with Adaptive Operating Voltage from 0.65V to 1.025V
• Tensilica VP6 Core inside
• VFGBA-633
2.2 Power Management IC (MT6357)
• MediaTek MT6357 power management IC is a programmable power management IC that integrates 5 buck
converters and 29 LDOs to provide all power rails required by SoC and peripherals.
• MT6357 adopts the SPI interface and two SRCLKEN control pins to control buck converters, LDOs, and various
drivers; it provides enhanced safety control and protocol for handshaking with the processor (MT8365).
• For system management, it provides the following features,
• 5 Buck Converters
• 29 LDOs
• Support Software Shutdown or Hardware Power Off
• 26MHz External Crystal for System Clock
• 32.768KHz RTC Oscillator for System Timing
• Watchdog Reset
• Over-current and Thermal Overload Protection
• OVP, UVLO Function
• VFBGA-209 Package
2.3 DRAM (Micron MT53E768M32D4DT-053)
Genio 350-EVK is embedded a 3GB LPDDR4 memory with the following features,
• Dual Channels with 16-bit Data Bus Width
• Up to 3200MHz Memory Clock
• Supports self-refresh/ partial self-refresh mode
• Supports dual-rank memory device
• Advanced bandwidth arbitration control
2.4 eMMC Storage (SanDisk/Western Digital SDINBDA4_64G)
• A 32GB eMMC 5.0 SanDisk (Wester Digital) SDINBDA4_64G is used for code and data storage, via MSDC0
interface of the Genio 350 processor (MT8365) with 8-bit width data bus.
To Next Page
Loading...