Medline Alterra MAXX - Technical Specifications; Bed Dimensions and Angles; Electrical Specifications; Locating the Serial Number

1-800-MEDLINE (633-5463) | medline.com 7
• Inspectthebedfordamageandnormaloperationperiodically.Reportanydamage,
abnormal operation, unusual noise or odor immediately to the maintenance department
and discontinue use of the bed.
SPECIFICATIONS
Bed Deck Length Adjustable from 80” to 88”
Bed Deck Width Adjustable from 36” to 42”
Overall Width (Including Side Rails) 41” – 47” depending on width selected &
side rails mounted
Overall Length with Foot Lock Extended 92”
Overall length with Foot Lock Retracted 88-1/2”
Minimum Bed Deck Height 7-3/4”
Maximum Bed Deck Height 30-1/4”
Maximum Safe Working Load* 600-LBS
Maximum Back Angle 70-Degrees +/-3
MaximumKneeAngle 28-Degrees +/-3
Trendelenburg/Reverse Trendelenburg Angle 10-Degrees +/-2
Bed Electronics Comply with IEC60601-2 EMC requirements
* This includes weight of the resident/patient and all other accessories including but not
limited to mattresses, head/foot boards, side rails, etc.
ELECTRICAL SPECIFICATIONS
Power: 120 V.A.C., 2A, 60HZ
Duty Cycle: 10% Max. (2 min. on./18 min off)
LOCATING ThE SERIAL NUMBER
• Theserialnumberlabelislocatedonthecenteroftheleftsidebedframe.
• Pleasehavetheserialnumberandmodelnumberofthebedavailablewhencalling
Medline Customer Service for parts and/or troubleshooting.