MEGA65 Welcome Guide
(continued from previous page)
70 screen close
80 color 0
90 print "{clr}{wht}have a {cyn}nice{wht} day!"
To convert this BASIC program listing to a PRG file with petcat, upload it to the MEGA65, then run it (using your
actual serial port device name for /dev/cu.usbserial...):
petcat -w65 -o myprogram.prg -- myprogram.bas
m65 -l /dev/cu.usbserial... mylisting.prg
m65 -l /dev/cu.usbserial... -T "run"
11.5 Finding other JTAG tools
If you’re interested in the debugging programs remotely, download the M65 Debugger app from Filehost (Windows,
Mac, or Linux). See the m65dbg README for more information on how to use the debugger, including video tutorials.
You can use the mega65_ftp command line tool to perform the SD Card file transfer functions of the M65Connect
app. This is available from the mega65-tools Github repository. Mac users: this will require a similar approval process
used to prepare the m65 command line tool, described above.
11.5. Finding other JTAG tools 73
To Next Page
Loading...