MEGA65 Welcome Guide
With both video outputs connected, I can switch the monitor input as needed without too much hassle.
The HDMI-to-DVI cable does not carry the HDMI audio signal, and the Dell 2001FP doesn’t have built-in speakers
anyway. I use a Dell soundbar and a separate speaker connection to the MEGA65 audio jack.
Tip: Is your HDMI output not working with a vintage DVI display? Double-check that you have “DVI only (no
audio)” selected in the MEGA65 video configuration. (Use a modern HDMI display or a VGA connection to see the
configuration screen.) “Enhanced (with audio)” mode will corrupt the DVI-only signal.
Tip: If you want a flexible vintage display that works well with vintage computers that use analog RGB signals such as
the Amiga, check out 15khz.wikidot.com for recommendations. The Dell 2001FP almost makes the cut: older versions
support a 15 kHz signal, newer ones (like mine, alas) do not. I use the 2001FP with my Commodore 64C and an
S-Video cable with great success.
13.3. 4:3 flat panel displays 87
To Next Page
Loading...