Battery charger specifications
No-load Voltage 41 V ± 2 V
Fast Charge Current 0.9 A ± 70 mA
Top-off Charge 130 mA ± 40 mA
Charge Termination
Options
-dV, dT/dt
Input Rating 90 a 264 V~ / 47 a 63 Hz
Maximum Output Power 35 W
Trickle Charge Current 50 mA ± 25 mA
Leakage Current
(from battery with mains off)
< 1 mA
Dimensions 4.22" x 2.64" x 1.44" (107 x 67 x 36.5 mm)
Weight 0.55 lbs (250g)
Input Connection 2 pins IEC 320-C7
Output Connection NiMH: 3 pins DIN
Operating Temperature -4° to 104°F (-20° to 40°C)
Insulation class II
Electrical safety approval EN 60601-1, EN 60950, EN 60335-2-29
EMC standards EN 61000-6-3 (Emission),
EN 61000-6-1 (Immunity)
Specifications are subject to change without notice.
To Next Page