MEGABRAS TR8703 - Erase Memory

The TR 8703 improves the quality of measurements in the following ways:
(1) Low noise electronics
(2) Shielded electronics and cables
(3) Differential measurements to reduce common-mode effects
(4) Ratiometric calculations to reduce dynamic errors
Fast Normal Slow
VT/PT
Approx. Measurement time
6,5 s 9 s 19 s
CT
Approx. Measurement time
14 s 16 s 43 s
Uses
Electrically quiet
environment
In most
applications
Electrically very
noisy
environment
3.3.7. Erase Memory
1. Press the ▼ or ▲ key until Erase Memory appears on the display,
then press ENTER.
2. Select Yes or No using ▼ or ▲ and press ENTER. The display will
return to Erase Memory.
CAUTION: Once the memory is erased, the stored data cannot be
recovered. Download the data, if desired, before the Erase
Memory function is executed.
26