"
.,6 <<0<;
• 32-bit processor Cortex M4 with 2 Mbyte flash memory
• QR barcode (other 2D barcodes on request)
• History control:
The printer has a 2-stage Dot History Control so that the rst "cold dots" of a print image are not illegibly
printed. The dot history can be combined with the subdivision of the peak currents WITHOUT reducing the
printing speed.
• Optional:
Unicode with more than 37,000 characters. This contains all the necessary country-specic characters, such
as Chinese, Japanese, Russian, or Arabic. Fonts can be loaded proportionally as well as non-proportionally
(monospace). For large displays (time/date), the fonts can also be stored in the original resolution.
• Preheat the printhead to the desired temperature range.
• Head control via FET. Protection against head damage caused by moisture.
• Power consumption:
The printer is suitable for direct connection to voltages of 10.8–26.5 VDC. This initially eliminates the energy
loss due to the efciency of an upward DC/DC converter for a 24 V printing unit. A high speed 12V variant is
available.
• Power Off:
The printer can be used with a power off operation. For the power off operation, the printer is switched off by a
synchronized command. This means that the command can also be at the end of a ticket. The printer is
completely switched off. You can wake up by toggling the RTS line or by applying a voltage of 3–24 V to the
GPIO input of the printer. In serial mode, the printer is ready for operation again after approx. 40 ms. With USB
interface after approx. 2–3 seconds, depending on the host system.
• Integrated statistics:
Storage of the most important operating data, e.g. cuts, operating time, mileage …… ..
• 3 modes for creating tickets:
1. Line mode:
Typical standard text printing with extensive formatting functions.
2. Form mode:
In the form mode all data to be printed are sent rst, before a command triggers printing. This means that
formatting can be carried out much more freely and extensively. E.g. Elements can be rotated or printed
overlapping.
3. Graphics mode:
In graphic mode, the ticket is sent completely as a graphic. Powerful data compressions also allow this
mode with the serial interface.
("(" ) " *+,-+,-+..% !"",'$/.,%.%%.
0"(! "(12 3 *+,-+,-+..'' .+4$%$.
5".6 )7 +8..$
-$..%"7 "3971," 7"31"1)),
" ,71," "! "75,
To Next Page
Loading...