Remote E-Stop and Lights Accessory
The remote Test Status Indication Lights (TSIL) and Test Status Indication Lights E-Stop (TSIL-ES) accessories show
operators and bystanders when power is being applied to a device under test. The remote E-Stop is used to stop
high-voltage testing in the event of an emergency.
Fig 11: Remote E-stop and lights accessory.
No Description
1 Remote Test Status Indication Lights E-Stop (TSIL-ES)
2 Remote Test Status Indication Lights (TSIL). An equipment stop Jumper must be installed on the open
connector if a remote equipment stop accessory (1) is not used.
www.megger.com/baker
Megger Baker ADX Quick Reference Guide
15
Accessories
To Next Page
Loading...
