EasyManua.ls Logo

Megger DET2/2 - Page 31

Megger DET2/2
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Display: Alpha numeric LCD (130 mm x 35 mm) giving test information and a large
(20 mm) 3
1
2 digitLCD, maximum reading 1999
Instrument Protection: Meets the general requirements of IP54
Temperature Effect: <±0,1%/°C over the temperature range -10°C to +40°C
Temperature Range: Operating: -10°C to +40 °C
Storage: -20°C to +60°C
Humidity: Operating: 90% RH max. at 40°C
Flash Test: 3 kV a.c.
Voltage Withstand: In the event of a system fault the instrument will withstand 240 V a.c.
applied between any two terminals.
Compliance with Standards: BS 7430 (1992) BS7671 (1992) NFC 15-100
VDE 0413 Part 7 (1982) IEC364
Power Supply: (i) Internal rechargeable sealed lead acid cells 12 V nominal, 2,6 Ah
capacity. Battery voltage range over which basic accuracy is
maintained, 11,0 V to 13,5 V.
Battery life: Typically 5 Hours continuous use
Battery charging time: 6 hours max. (from completely exhausted).
Charging supply required: 100 V to 130 V or 200 V to 260 V a.c. 50 Hz/60 Hz.
Power consumption: 25 VA

Table of Contents

Related product manuals