Megger MIT520/2 - Accessories; Available Lead Sets and Accessories

Lead set
Three flexible silicon insulated leads with compact clamp
Safety
Meets the requirements of IEC61010-1 CAT IV 600 V
EMC
Meets the requirements of IEC61326-1
Operating uncertainties
Refer to www.megger.com
Operating temperature
-20°C to 50°C
Storage temperature
-25°C to 65°C
Ingress protection (lid closed)
IP65
Humidity
90% RH non-condensing at 40°C
Dimensions
305 x 194 x 360 (mm) (12 x 7.6 x 14.2 inches)
Weight
7.1 kg (16lb) approx.
20
ACCESSORIES
Order Code
Included Accessories
3 m lead set, medium size insulated clips 6220-820
User guide on CD-ROM 2000-213
RS232 cable 25955-025
USB cable 25790-041
Optional Accessories
HV test lead sets
3 x 3 m with un-insulated small clips 8101-181
3 x 8 m with un-insulated small clips 8101-182
3 x 15 m with un-insulated small clips 8101-183
3 x 10 m with medium insulated clips 1000-441
3 x 15 m with medium insulated clips 1000-442
3 x 3 m with large insulated clips 6220-811
3 x 10 m with large insulated clips 1000-443
3 x 15 m with large insulated clips 1000-432
Control circuit test lead set
2 x 3 m with small insulated clips 6220-822
Screened HV test leads
1 x 3 m, wtih 5 kV screened un-insulated small clips 6220-835
1 x 15 m, with 5 kV screened un-insulated small clips 6311-080