6
1.1 General Notes
Safety precautions
This manual contains basic instructions on commissioning and operating the
VLF Sinus 34 kV. For this reason, it is important to ensure that the manual is available at
all times to authorised and trained personnel. Any personnel who will be using the devices
should read the manual thoroughly. The manufacturer will not be held liable for any injury
or damage to personnel or property through failure to observe the safety precautions
contained in this handbook.
Locally applying regulations have to be observed.
Labelling of safety
instructions
Important instructions concerning personal, operational and technical safety are marked in
the text as follows:
Symbol Description
WARNING
Indicates a potential danger that may lead to fatal or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or material damage.
The notes contain important information and useful tips for using the
system. Failure to observe them can render the measuring results
useless.
Working with products
from Megger
It is important to observe the general electrical regulations of the country in which the
device will be installed and operated, as well as the current national accident prevention
regulations and internal company rules (work, operating and safety regulations).
Use genuine accessories to ensure system safety and reliable operation. The use of other
parts is not permitted and invalidates the warranty.
Operating staff This system and its peripheral equipment may only be operated by trained or instructed
personnel. Anyone else must be kept away.
The system may only be installed by an authorised electrician. DIN VDE 0104 (EN 50191),
DIN VDE 0105 (EN 50110) and the German accident prevention regulations (UVV) define
an electrician as someone whose knowledge, experience and familiarity with the
applicable regulations enables him to recognise potential hazards.
To Next Page
Loading...
Need help?
General
