OPERATION
OI c5 eng V9 / 18.08.2006 5 - 9 © Cafina / Melitta
E
5.4 Dispensing of bever-
ages
5.4.1 Dispensing normal coffee
The following description of how to dis-
pense beverages assumes the following al-
location to the beverage selection buttons:
Product fields from top to bottom ...
Espresso [ ]
Ristretto
Coffee Cream [ ]
Coffee Special
Cappuccino [ ]
Macchiatto
Cup of [ ]
cold milk
Hot milk [ ]
Decaffeinated
Level assignment ...
Level 1 ....... [ ]
Level 2 .......
Reference products ...
Stopping the product flow ...
You can interrupt the flow of beverage at
any time by pressing the Shift/Stop button
[ ], if this has been configured on the
control side.
5.4.1.1 General sequence
1. Push the beverage outlet upwards.
2. Place coffee cup(s) under the bever-
age outlet.
3. Push the beverage outlet downwards
until the coffee cup(s) can be removed
without having to push the beverage
outlet upwards again.
4. When this message is displayed, the
coffee maker is ready to dispense bev-
erages ...
5. Decide your beverage dispensing strat-
egy.
! Level 1 beverage
! Level 2 beverage
! One cup from a single infusion oper-
ation
! More than one cup from a single in-
fusion operation
! Two cups from a single, combined
infusion operation (TWIN function)
! Several cups (two each) from a sin-
gle, combined infusion operation
(TWIN function)
6. Dispense the beverages.
NOTE
* after the product in the display
means "reference product from
bean hopper 1".
** after the product in the display
means "reference product from
bean hopper 2".
NOTE
• The TWIN function can only
be used if it has been acti-
vated by Customer Support!
Select beverage
To Next Page
Loading...
Need help?
General
