Melitta CAFFEO LATTEA User Manual

ENGLISH
47
4 Starting up
When starting the appliance for the rst time, please carry out the following steps.
When you have completed these steps, the appliance is ready for operation. You
can now prepare coffee.
We recommend pouring away the rst two cups of coffee after the rst start
up.
4.1 Setting up
• Place the appliance on a stable, level, and dry surface. Make sure that
there is a distance of 10 cm to the wall and other objects.
• The Melitta
®
CAFFEO
®
LATTEA
®
has two rollers on the back side of the
appliance. It can thus be easily moved by slightly lifting it from the front.
Caution!
– Never place the appliance on hot surfaces or in damp areas.
– Do not transport or store the appliance in vehicles or rooms at low
temperatures, as the remaining water could freeze or condense and
thereby damage the appliance. Follow the instructions on page 72.
• The coffee grounds container is located in the drip tray. Please make
sure that the drip tray is pushed into the appliance all the way to the
stop.
Notes
– Keep the packaging material, including hard foam elements, in order to
avoid damage during transport or in case of return shipments.
– It is normal to nd traces of coffee and water in the machine before it is
started up for the rst time. This is because the appliance has already
been tested for faultless function at the factory.

Melitta CAFFEO LATTEA Specifications

General

Type	Coffee/Espresso
Product color	Black, Purple
Removable water tank	Yes
Product type	Espresso machine
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Multi beverage	No