ENGLISH
57
9 Preparing hot water
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 51).
Take off the milk canister and place a tall vessel under the milk shower.
• Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
open the milk shower.
→ The symbol for the milk shower is ashing. Approximately 90 ml of hot
water ows out of the milk shower and into the vessel. You can conclude
this process at anytime by closing the milk shower.
• Turn the rotary switch for the milk shower anti-clockwise to close the
milk shower.
• Repeat the process if the desired quantity of hot water has not been
reached.
To Next Page
Loading...
