Melitta CAFFEO LATTEA User Manual

56
8 Preparing milk froth
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 51).
Place a vessel (e.g. a latte macchiato glass) under the milk canister.
• Remove the milk canister and ll it with the milk2shower milk powder.
• Place the milk canister on the magnetic holding point under the milk
shower (Fig. A, no. 13).
• Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
open the milk shower.
→ The symbol for the milk shower is ashing. Approximately 90 ml of hot
water ows into the milk canister and generates the milk froth. The milk froth
runs out of the milk canister into the vessel below the canister. The ow of
water stops automatically after about 90 ml.
• Turn the rotary switch for the milk shower anti-clockwise to close the
milk shower (this can also be done prematurely if you desire less milk
froth).
• Now start the coffee dispensing process, e.g. to prepare a latte
macchiato.

Melitta CAFFEO LATTEA Specifications

General

Type	Coffee/Espresso
Product color	Black, Purple
Removable water tank	Yes
Product type	Espresso machine
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.2 L
Multi beverage	No