70
7 Add the descaling agent (e.g. Melitta
®
ANTI CALC Espresso Machines
liquid descaling agent) to the water tank according to the instructions on
the packaging.
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specied on the
descaling agent packaging.
8 Reinsert the water tank.
9 Press the button for coffee strength to continue with the integrated
descaling programme.
→ The integrated descaling programme is started. Water ows inside
the appliance into the drip tray in multiple intervals. This stage lasts
approximately 15 minutes. Subsequently, the symbol for the milk shower
illuminates.
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols are shown on the display.
10 Make sure that the coffee grounds container is placed directly under the
milk shower.
11 Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
open the milk shower.
→ Water ows out of the milk shower into the coffee grounds container. The
symbol for the milk shower ashes during this process.
Subsequently, the symbol for the drip tray illuminates.
12 Leave the milk shower open.
13 Empty the drip tray and coffee grounds container.
14 Reinsert the drip tray without the coffee grounds container and place
the coffee grounds container under the milk shower.
→ The symbol for the water tank illuminates.
To Next Page
Loading...
Need help?
General
