What does it mean when all buttons are flashing on my Melitta Coffee Maker?
Continuous flashing of all buttons indicates a system error. Try switching the appliance off and on again via the ON/OFF button. If this doesn't solve the problem send the appliance to the service department.
Why is the grinder not working on my Melitta Caffeo Solo & Milk Coffee Maker?
If the grinder of your Melitta Coffee Maker is not grinding, try tapping lightly on the bean container to help the beans fall into the grinder. If that does not help, there might be foreign objects in the grinder, in this case you should call the hotline.
Why are the bean symbols flashing on my Melitta Coffee Maker when it's full?
If the bean symbols are flashing on your Melitta Coffee Maker even though the bean container is full, it indicates an insufficient quantity of ground beans in the brewing chamber. Press the button or button to resolve this.
Why is my Melitta Caffeo Solo & Milk not frothing milk properly?
If not enough milk froth is formed during the frothing process in your Melitta Coffee Maker, ensure the steam pipe nozzle is in the correct position. If it is, the steam pipe nozzle may be dirty and require cleaning.
How to fix a Melitta Caffeo Solo & Milk that only drips coffee?
If coffee only flows drop-by-drop from your Melitta Coffee Maker, the grinding fineness may be too fine. Adjust the grinding fineness to a coarser setting. Also, clean the brewing unit. If needed, perform a descaling or cleaning program.
Why are the cleaning and standby lights flashing on my Melitta Caffeo Solo & Milk Coffee Maker?
If the symbols for cleaning and stand-by are flashing alternately on your Melitta Coffee Maker, it means that the brewing unit is either missing or not properly inserted. Ensure the brewing unit is correctly inserted. Alternatively, the brewing chamber might be overfilled. In this case, switch the appliance off and on again using the ON/OFF button until standby mode is displayed.
What to do if the cleaning cycle was interrupted on my Melitta Caffeo Solo & Milk?
If the cleaning or descaling process of your Melitta Coffee Maker was interrupted due to a power outage, the appliance will autonomously perform a rinsing program. Follow the instructions displayed on the appliance to complete this process.
Why is no coffee coming out of my Melitta Coffee Maker?
If coffee is not flowing from your Melitta Coffee Maker, ensure the water tank is filled and correctly inserted. Additionally, the brewing unit may be obstructed and require cleaning.
What to do if all buttons are flashing on my Melitta Coffee Maker?
If the Melitta Coffee Maker displays continuously flashing buttons, this indicates a system error. Try switching the appliance off and on again using the ON/OFF button. If the problem persists, the appliance should be sent to the service department.
Why does my Melitta Caffeo Solo & Milk Coffee Maker only brew coffee drop by drop?
If coffee only flows drop by drop from your Melitta Coffee Maker, the grinding fineness might be too fine. Set the grinding fineness coarser. Additionally, clean the brewing unit. If the issue persists, run the integrated descaling and cleaning programmes.
General| Milk tank | No |
|---|---|
| Product type | Espresso machine |
| Capacity in cups | 2 cups |
| Hot water system | Yes |
| Number of spouts | 2 |
| Coffee input type | Coffee beans |
| Coffee maker type | - |
| Appliance placement | Countertop |
| Water tank capacity | 1.2 L |
| Coffee beans capacity | 125 g |
| Reservoir for brewed coffee | Cup |
| Number of temperature settings | 3 |
| Product color | Silver |
| Pump pressure | 15 bar |
| Number of cups | 2 pc(s) |
Weight and Dimensions| Depth | 455 mm |
|---|---|
| Width | 200 mm |
| Height | 325 mm |
| Weight | 8100 g |
Details on avoiding electrical hazards, including damaged cables and opening covers.
Instructions to avoid scalds and burns from hot fluids and steam.
Covers safety for children, supervision, and disconnecting power.
Details the steps for initial venting and operation before first use.
Instructions for filling the water reservoir and bean container before operation.
Guides on adjusting dispensed quantity and coffee strength.
Initiates descaling with water reservoir preparation and descaling agent addition.
Continues descaling with intermittent water flow and container management.
Final descaling phase involving water flow, emptying, and rinsing.
Lists common issues like coffee flow problems and their corresponding measures.
To Next Page