Melitta Caffeo Solo User Manual

6666
Phase 1
During Phase 1, the one bean symbol is shown on the display.
3 Empty the drip tray and then reinsert it.
→ The symbol for the water tank illuminates.
4 Lift the lid of the water tank (Fig. A, no. 6) and pull the water tank up
and out of the appliance and then empty it completely.
5 Add the descaling agent (e.g. Melitta
®
ANTI CALC Espresso Machines
liquid descaling agent) to the water tank according to the instructions on
the packaging.
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specied on the
descaling agent packaging.
6 Reinsert the water tank.
7 Press the button for coffee strength to continue with the integrated
descaling programme.
→ The integrated descaling programme is started. Water ows inside
the appliance into the drip tray in multiple intervals. This stage lasts
approximately 15 minutes. Subsequently, the symbol for the drip tray
illuminates.
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols are shown on the display.
8 Empty the drip tray and then reinsert it.
→ The symbol for the water tank illuminates.
9 Thoroughly rinse the water tank, ll it to the max. mark with fresh tap
water and reinsert it.
10 Press the button for coffee strength to continue with the integrated
descaling programme.

Melitta Caffeo Solo Specifications

General

Product type	Espresso machine
Self-cleaning	Yes
Capacity in cups	2 cups
Coffee input type	Coffee beans
Appliance placement	Built-in
Type	Coffee/Espresso
Product color	Black
Built-in display	No

Weight and Dimensions

Depth	455 mm
Width	200 mm
Height	325 mm