67
ENGLISH
67
→ Water ows out of the outlet as well as in the interior of the appliance into
the drip tray. This stage lasts approximately 5 minutes. Subsequently, the
symbol for the drip tray illuminates.
→ Phase 2 is completed.
Phase 3
During Phase 3, three bean symbols are shown on the display.
11 Empty the drip tray and then reinsert it.
→ The standby symbol illuminates after a brief heat-up phase.
The appliance is ready for operation.
12 Reinsert the Melitta
®
Claris
®
water lter into the water tank.
To Next Page
Loading...
