Melitta Caffeo Solo User Manual

71
ENGLISH
71
Problem Cause Solution
The brewing unit
can no longer be
reinserted after
removal.
The brewing unit is not
properly locked.
Check whether the handle
for locking the brewing unit is
correctly engaged.
The drive is not in the
proper position.
Switch the appliance off and
on again, and then press
the buttons for one- and
two-cup dispensing
simultaneously for longer than
2 seconds. The drive moves
into position. Then reinsert the
brewing unit and make sure it
is correctly locked into place.
The buttons for
one- and two-cup
dispensing
ash alternately with
the ON/OFF button
.
The brewing unit is
missing or is not properly
inserted.
Insert the brewing unit properly.
The brewing chamber is
overlled.
Switch off the appliance and
switch it on again via the ON/
OFF button (repeat if
necessary) until standby mode
is displayed.
Continuous ashing
of all buttons
System error Switch off the appliance and
switch it on again via the ON/
OFF button ; if this does
not solve the problem, send
the appliance to the service
department.
Please contact the Melitta
®
hotline, if the above mentioned solutions do not help to
solve the problem: +49 571/ 86 1900.

Melitta Caffeo Solo Specifications

General

Product type	Espresso machine
Self-cleaning	Yes
Capacity in cups	2 cups
Coffee input type	Coffee beans
Appliance placement	Built-in
Type	Coffee/Espresso
Product color	Black
Built-in display	No

Weight and Dimensions

Depth	455 mm
Width	200 mm
Height	325 mm