6.7 Changing beverage settings before and during
preparation
Beverage settings can be changed before and during beverage preparation.
Information
The following settings only apply to the current beverage preparation.
Changing beverage settings before preparation
The total beverage amount and the coee strength can be changed before
selecting a beverage.
Before selecting a beverage, use the arrow buttons to set a beverage
amount.
Before selecting a beverage, use the "Coee strength" button to set the
coee strength.
Information
ū When preparing mixed beverages, the total beverage amount is sub-
divided according to a specied ratio. This applies to mixed beverages
made from coee with milk or hot water.
ū If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Changing beverage settings during preparation
The beverage quantity and the coee strength can be changed during
beverage preparation.
During beverage dispensing, use the arrow buttons to set the relevant
beverage amount.
During the grinding process, use the "Coee strength" button to set the
coee strength.
To Next Page
Loading...
Need help?
General
