Requirement: The ready symbol appears on the display.
1. Place the coee grounds container (7) or a vessel with a capacity of at
least 0.7 litres beneath the outlet.
2. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk system menu.
4. Select Start using the arrow buttons and conrm with "menu/ok".
5. Follow the further instructions on the display up to the end of the clean-
ing programme.
» The ready symbol appears on the display.
Cleaning the milk unit
In addition, we recommend cleaning the milk unit, the milk hose and the
milk container regularly (depending on the model).
40
39
Fig. 21: Removing the milk unit
Proceed as follows to remove the milk unit:
Requirement: The milk hose is removed from the appliance.
1. Pull o the cover (39) forwards from the outlet.
2. Press the milk unit (40) downwards and remove it.
3. Dismantle the milk unit into three parts as shown above.
4. Clean the individual parts with warm water. Use the enclosed cleaning
brush, a soft, damp cloth and normal washing-up liquid.
Installation is carried out as described in reverse order.
To Next Page
Loading...
Need help?
General
