EasyManua.ls Logo

Melitta CT8 - Starting the Cleaning Program

Melitta CT8
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
If the grounds drawer has been pulled out or has not
been correctly inserter, the display will show a corre-
sponding message. If this was the case for longer
than 3 seconds, you will be asked whether the
grounds drawer is empty:
Press the "Yes" button if the grounds drawer
has been emptied.
b) Starting the cleaning program
The machine cleans the milk section first and then
the coffee section after. This process runs almost
completely automatically.
(1) Replace the milk container with an empty
cleaning container.
Clean the outside of the milk hose, which pro-
trudes from the machine, with a damp cloth.
Clean the interior of the refrigerator (if present)
as well as the door and the door seals with a
conventional domestic cleaning agent.
Leave the door open throughout the complete
cleaning process. Condensation water will be
generated, which would otherwise cause an im-
pairment of the function.
(2) In the display touch the control button “Menu”
and then ...
“Clean complete system and switch off”, if
you want to have the milk and brewing system
cleaned and the machine finally switched off.
“Clean complete system”, if you want to have
the milk and brewing system cleaned, but would
like to continue operation after.
A soon as “Prepare the cleaning agent” appears in
the display, ...
(3) place a cleaning tablet into the prepared clean-
ing container and ...
confirm the placement of the cleaning tablet in
the display by touching “Cleaning agent is pre-
pared”. The milk system is now being cleaned.
1
3
2

Other manuals for Melitta CT8

Related product manuals