9
7.3 Product dispensing via product filter
For dispensing products via product filters you can
select the desired product by using various selection
criteria.
The following criteria are available:
(7) Size: Here you set the pre-selectable portion
size.
(8) Coffee: Here you select whether the product is
to be chosen with/without coffee or with decaf-
feinated coffee.
(9) Milk: Here you select whether the product is to
be chosen with/without milk.
(10) Syrup: Here you select whether the product is to
be chosen with/without syrup.
(11) Milk temperature: Here you select whether the
product is to be chosen with cold/warm milk.
(12) Milk consistency: Here you select whether the
product is to be chosen with milk or milk froth.
Once you have chosen the product to be dispensed
by using the pre-selected product criteria ...
(13) touch the product in the display to dispense the
product.
Products to be dispensed are highlighted with the
following symbols:
: This product will be dispensed by a single
touch of the control button. After the dispensing
process the machine will return to the start
screen.
: This product will be dispensed, as long as
the control button in the display is touched. Af-
ter the dispensing process you touch the control
button “Home” to return to the start screen.
(14) A pre-selection can be aborted at any time by
touching the control “Home”. The machine will
then return to the start screen.
(15) To choose your preferred display language
touch the pre-set language in the display.
7.4 Aborting the dispensing process
(16) Depending on product pre-setting you can abort
the running dispensing process by touching the
control button “Cancel” during the dispensing
process.
16
8
7
10
12
9
11
13
14 15
To Next Page
Loading...
