EasyManua.ls Logo

Melitta CT8 - Preparation; Filling Coffee Provision; Refilling Milk System; Switching the Machine On

Melitta CT8
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
6. Preparation
Initial commissioning is performed by the customer
service. If you want to restart operation after the ma-
chine has been out of operation:
Check first whether cleaning is required as de-
scribed under 8.1.
6.1 Filling up the coffee provision
Open the lid of the bean container and fill …
Decaffeinated coffee beans into the right and
Coffee beans in the left container.
6.2 Refilling with milk
Ensure that the milk system has been cleaned,
before using it (see 8.1.).
Place a container with milk next to the machine
(e.g. in the optional refrigerator) and place the
milk suction hose in the milk container.
6.3 Switching On
(1) Open the machine door with the key.
(2) With the Main switch the machine can be
switched off completely, e.g. for longer periods of
rest.
However, for every day operation it is sufficient to
switch the machine on and off only by the menu in
the display. Touch the display to switch on.
(3) The display shows the question “Power up“.
Confirm this with “Yes”.
After switching on, the machine heats up and runs a
self-test. It takes several minutes, until the machine is
ready for dispensing.
If the machine notes to be clean after switching on,
you do this as described under 8.3.
If you need any support for operating the machine,
call up the help function via the control button “?”.
3
1
2

Other manuals for Melitta CT8

Related product manuals