8
7. Dispensing products
As soon as the machine is heated up, the products
that can be currently dispensed are shown in the
display. Should products not be available, e.g. be-
cause of missing (e.g. coffee powder, milk), these
products will not be displayed.
Depending on pre-settings by our customer service
dispensing takes place as follows:
Product dispensing via groups (7.2)
Product dispensing via product filter (7.3).
7.1 Placing the vessel
(1) You can place the individual cups centrally under
the spout for coffee products or hot water, or
you can stand two cups next to each other.
(2) The dispenser is height-adjustable for large
mugs, small pots or glasses.
7.2 Product dispensing via groups
In case of product dispensing via groups, the prod-
ucts to be dispensed are grouped according to
their criteria (e.g. size, coffee speciality, etc.).
You can choose products to be dispensed by
touching and thus opening the specified groups to
access the desired product for dispensing.
Product to be dispensed and product groups are
highlighted with the following symbols:
(3) : This is a product group. You open it by
simply touching the group.
(4)
: This product will be dispensed by a single
touch of the control button. After the dispensing
process the machine will return to the start
screen.
(5) : This product will be dispensed, as long as
the control button in the display is touched. Af-
ter the dispensing process you touch the control
button “Home” to return to the start screen.
(6) A pre-selection can be aborted at any time by
touching the control “Home”. The machine will
then return to the start screen.
(7) To choose your preferred display language
touch the pre-set language in the display.
2
1
4 3
6 7
5
To Next Page
Loading...
